Gas Monitor
Total Analytical Solution 
D-2-4, Setia Walk, Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia
 
Tel: + 6012-921 3877; 603-5879 7121
Fax: +018 635 1593
Email: ancor.my@gmail.com
            sales@gasmonitors.com.my
   Home      Drager- Drager PIR 7000
 

Dräger PIR 7000

 
The best performance characteristics alongside the greatest flexibility – the gas library of the infrared-optical transmitter Dräger PIR 7000 can be freely configured and offers exceptional linearity for each library substance across the whole measuring range.
 

Exceptional signal stability

​Based on patented innovations, the Dräger PIR 7000 combines maximum light-efficient optics with a signal-stabilizing 4 beam technology. The double-compensating construction is characterized by the greatest possible robustness towards interferences (e.g. dust and dirt deposits). Due to its non-imaging nature, the measuring signal of the Dräger PIR 7000 remains unaffected by a partially covered beam. It can thus be ensured that the instrument fully complies with the requirement "no false alarms" .  
 
 

 

Maximum reliability – SIL 2 certified!

​The Dräger PIR 7000 was developed and produced in accordance with SIL standards EN 61508 and EN 50402. For the first time ever, the software of a gas detection device was also assessed – excellent parameters and a SIL 2 certificate from the German TÜV certify the high product quality and reliability of the Dräger PIR 7000: Only two percent of a SIL 2 budget are utilized by the Dräger PIR 7000. Therefore, there is still much flexibility in the selection of control system and actuators. The Dräger PIR 7000 therefore not only meets the SIL 2 requirements but far surpasses them.
 
 

Fast response mode

​The sooner a measurable gas concentration is indicated, the faster counter measures can be initiated. The configurable response mode of the Dräger PIR 7000 can be set to "fast" for this purpose. In this mode, each measurable gas concentration is indicated within one second. In conjunction with low alarm thresholds, the gas transmitter can contribute to significantly reducing reaction times in the case of an emergency
 
 

Multiple configuration capabilities

​The standard parameterization of the Dräger PIR 7000 is based on many years of experience. Nonetheless, the device provides the option of setting many parameters specifically for customers and applications. This includes smaller measuring ranges, configurable special signals (for fault, beam block warning and maintenance) as well as adjustable LEL values. And by uploading additional substances into the gas library, the Dräger PIR 7000 can optimally display each target gas.
 
 

Performance features

  • Two versions (type 334 and type 340) with different measuring wavelengths for different hydrocarbons with different sensitivities
  • Double-compensating and non-imaging optics (with 4-beam technology)
  • Customer-specific gas library: methane and propane (as well as ethylene for type 334) always included, up to 10 further uploadable substances
  • Configurable measuring range in %LEL, %(v/v) and ppm
  • Fastest response time of less than 1 second (t0..90 time)
  • Analog 4 to 20 mA and digital HART® output signal (including HART multidrop mode)
  • Beam block warning signal in the case of contaminated optics for predictive maintenance
  • Multiple configuration capabilities of all special signals (in accordance with NAMUR NE 43)
  • Specified minimum supply voltage of 13 V DC
  • Extended specified temperature range from - 40 °C to + 77 °C / - 40 °C to + 170 °F
  • Unrestricted usage in humid atmospheres
  • Hermetically close enclosure made of stainless steel SS 316L
  • Long maintenance interval thanks to minimum long-term
 
 
 
D-2-4, Setia Walk, Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia

Tel: + 6012-921 3877; 603-5879 7121
Fax: +018 635 1593
Email: ancor.my@gmail.com 
           sales@gasmonitors.com.my