Gas Monitor
Total Analytical Solution 
D-2-4, Setia Walk, Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia
 
Tel: + 6012-921 3877; 603-5879 7121
Fax: +018 635 1593
Email: ancor.my@gmail.com
            sales@gasmonitors.com.my
   Home      Humidity & Moisture Meter
 
 
 
 
 
 
 
 
       
 
 
 
 

MOISTURE METERS for WOOD & BUILDING MATERIALS

 
 
 
 
MC-160SA
 
 
  • Pin-less & non-destructive: Capacitance measurement using a high frequency dielectric field
  • Could be used on different materials as wood, concrete, brick and plaster
  • Select from 6 wood groups (about 230 species) or 6 building material groups (E0 - E5)
  • Moisture detection down to depth of 50 mm
  • Low battery warning & Auto power off
  • Impact resistant ABS housing
 
 
MC-380XCA
 
 
  • Direct read out of Moisture Content in percent water or in Relative Air Humidity (RH%
  • Dual scanning Depths (10 mm and 100 mm)
  • Non Invasive measurement
  • Extended Material Selection groups.
  • Selectable Alarm Threshold
  • Audio Alarm
  • Hold Function
  • Density selection of wood Groups
  • Woodworkers
 
 
MC-500
 
 
  • Pin-less & non-destructive: Capacitance measurement using a high frequency dielectric field
  • Could be used on different materials as wood, concrete, cement wash floor, brick, plaster, gypsum board, clinker and clay floor tiles, sandstone, marble, etc.
  • Quickly indicates the moisture content of materials
  • Moisture detection down to a depth of approx. 40 mm
  • Low battery indication
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
BDD "mini"
 
 
  • Is a pin-moisture detector used by Constructors, House inspectors, Woodworkers and Homeowners for rapid detection of moisture levels, moisture related problems, dampness and leaks in walls, floors and roofs.
  • Detect dampness and related moisture problems
  • Check surface moisture before painting, varnishing and other surface treatments
  • Locate/trace source for leaks and dampness
 
 
 
MC-460
 
  • Digital hand-held moisture meter for quick and accurate determination of the moisture content in softwood, hardwood, other wood materials according to the resistance measuring procedure.
  • S-10 Double needle probe-wood
  • S-10P Probe, 23 cm for paper and Palm Oil tree fibers
  • S-30 Sliding hammer probe
  • S-40 Compression Chamber Sampel Cup with
  • Connection cable 1,0 m
  • Surface electrodes, veneer measuring
  • Durable plastic carrying case
  • Steel nail for S-10/S-30 probe
  • Length and measuring depth: 12, 19, 26, 56 mm
  • Needle electrodes with Teflon isolation for S-10/S-30 probe
  • Length and measuring depth: 30, 45 mm

 
 
MC-600SD
 
  • Is a state-of-the-art device for measuring moisture contents in sawdust, wood shavings, slivers and other finely crumbled wood waste.
  • It can also measure Moisture Content in Hay and Straw.
  • The Moisture Meter measures the resistance of a compressed sample.
  • Fast display of measuring results.
  • Pellet (Pelletizing) and Brickette manufacturing
  • Anyone who needs a professional quality tool to control Moisture Content in Sawdust, other wood shavings as well as Straw and Hay
 
 
FMG 3000
 
  • Designed to quickly determine the percentage of the moist content in wood chips.
  • The moisture determines the heat value of the fuel and thus the price to which wood chips is accounted for.
  • User-friendliness handling
  • The percentage of the water content can be accurately read off on an LCD-display within seconds.
  • The robust construction has been designed for heavy-duty use
 
 
MC-60CPA
 
  • Pin-less & non-destructive: Capacitance measurement using a high frequency dielectric field
  • Select from 12 material codes for paper
  • Moisture detection down to depth of 50mm max
  • Low battery warning & Auto Power Off
  • Impact resistant ABS housing
  • Complete with 9V battery and carrying case
  • Filter Paper, tissue paper
  • Crepe paper
  • Package paper, fluting paper
  • Kraft paper
  • Offset paper
  • Card Board
 
 
 
 

Moisture Indicator for wood and building materials

 
 
 
 
 
 
 
 
 
 
 
 
 
 
BDD Mini
 
 
 
MC-410
 
 
 
 
 
MC-411
 
 
MC-420
 
 
 
 
MC-500
 
 
 
 
MC-550
 
 
 
 
 
 
 
 
 
 
 
        
 
 
 
 
 

The New Orion Line of Pinless Wood Moisture Meters

 
 
 
 
Orion® 910 Deep Depth Pinless
Wood Moisture Meter
 
  • Deep Depth Measurements
  • IntelliSense™ Technology
  • Fast Selection Species Settings
  • Non-Damaging Pinless Sensor
  • Virtually Unaffected by Temperature
  • On-Site Calibration
  • Relative Moisture Measurement Mode
  • Press to Hold Readings
  • Programmable Alarm
  • 7-Year Warranty
  • Ruggedized Protective Rubber Boot and Hard Case
 
 
 
 
Orion® 920 Shallow Depth Pinless
Wood Moisture Meter
 
  • Shallow Depth Measurements
  • Fast Selection Species Settings
  • Non-Damaging Pinless Sensor
  • Virtually Unaffected by Temperature
  • On-Site Calibration
  • Relative Moisture Measurement Mode
  • Press to Hold Readings
  • Programmable Alarm
  • 7-Year Warranty
  • Ruggedized Protective Rubber Boot and Hard Case
 
 
 
 
 
 
Orion® 930 Dual Depth Pinless
Wood Moisture Meter
 
  • Dual Depth Measurements
  • Intellisense Technology
  • Fast Selection Species Settings
  • Non-Damaging Pinless Sensor
  • Virtually Unaffected by Temperature
  • On-Site Calibration
  • Relative Moisture Measurement Mode
  • Press to Hold Readings
  • Programmable Alarm
  • 7-Year Warranty
  • Ruggedized Protective Rubber Boot and Hard Case
 
 
 
Orion® 940 Data Collection Pinless
Wood Moisture Meter
 
  • Data Collection
  • Dual Depth Measurements
  • IntelliSense™ Technology
  • Fast Selection Species Settings
  • Non-Damaging Pinless Sensor
  • Virtually Unaffected by Temperature
  • On-Site Calibration
  • Relative Moisture Measurement Mode
  • Press to Hold Readings
  • Programmable Alarm
  • 7-Year Warranty
  • Ruggedized Protective Rubber Boot and Hard Case
 
 
 
Orion® 950 Smart Pinless Wood Moisture Meter
with Temperature /RH
 
  • Bluetooth App Enabled
  • Temperature and Humidity Sensor
  • Dew Point Calculations
  • Equilibrium Moisture Content
  • Grains Per Pound/Kilogram Mode
  • Data Collection
  • Dual Depth Measurements
  • IntelliSense™ Technology
  • Fast Selection Species Settings
  • Non-Damaging Pinless Sensor
  • Virtually Unaffected by Temperature
  • On-Site Calibration
  • Relative Moisture Measurement Mode
  • Press to Hold Readings
  • Programmable Alarm
  • 7-Year Warranty
  • Ruggedized Protective Rubber Boot and Hard Case
 
 
 
 
 
L601-3 Handheld Moisture Meter
 
 
  • This model is available in 2 different versions: pre-calibrated for either Douglas-fir (DF) or Southern yellow pine (SYP).
  • In either case, an accompanying instruction manual includes species adjustment tables for more than a hundred of the most used hardwood, softwood, and imported species.
  • Non-invasive scanning: does not mar or damage the surface of wood being tested.
  • Low battery light: warns the user that voltage has been drained to a level where the batteries must be changed to ensure the meter functions properly.
  • The L601-3 also features an automatic shut-off (battery saver).
  • 1-year warranty.
 
 
 
L620 Digital Lumber Moisture Meter
 
 
  • Storage of up to 500 individual moisture readings.
  • Readings are retained even when the batteries have been replaced.
  • The L620 is factory-supplied with 32 built-in common species. These can be customized to allow for changes in regional calibration.
  • Readings can be stored in up to 5 different groups for comparison of average MC, standard deviation, and minimum/maximum MC.
  • The LCD screen is backlit, making it easier for measurements to be taken in low-light environments.
  • Battery life: ~50 hours of continuous use, will be less when the backlight is turned on.
  • When the battery voltage is low, “BAT” will be displayed.
  • Auto shut-off in 1 minute unless a function button has been pressed or an MC reading has changed.
  • 1-year warranty.
 
 
 
 
L622 Digital Recording Moisture Meter
 
 
  • Takes up to 5,000 separate moisture readings.
  • Stores readings in up to 200 easily organized groups for comparison of average moisture content, standard deviation, and minimum/maximum moisture content.
  • Built-in real-time clock/calendar.
  • Using nonvolatile memory, the L622 will retain the stored readings even when the batteries are removed or changed.
  • Battery life, ~50 hours of continuous use, will be less when backlight is turned on.
  • When the battery voltage is low, “BAT” will be displayed.
  • A ‘no-activity’ auto shut-off in 1 minute saves battery life.
  • Operating temperature 30-120 degrees F.
  • 1-year warranty.
 
 
 
L600 Series Ruggedized Carrying Case
 
 
  • A very high-quality, ruggedized carrying case for our L601-3, L620, and L622 handheld moisture meters.
  • This foam-lined case will provide great protection for the investment of your Wagner moisture meters.
 
 
 
L722 Lumber Stack Probe Sensor
 
  • Probe hinge assembly is resistant to breakage when overstressed.
  • Metal extrusion provides durability and ruggedness for mill environments.
  • Leaf spring design ensures proper contact with the lumber for more accurate readings. The springs are user replaceable if damaged.
  • Sensor Probe Head is easily detachable from the extrusion for field servicing.
  • Spare Sensor Probe Heads can be purchased separately.
  • Available in Long (L) and Short (S) lengths.
 
 
 
 
 
 
 

Rapid RH® and Concrete Moisture Test

 
 
 
 
 
Smart Logger™ | Bluetooth Temperature & Humidity Sensor
 
  • The Wagner Meters Smart Logger is a discrete Bluetooth temperature and humidity data logger.
  • Capable of capturing, recording, and sending up to 12,000 readings or 300 days of ambient temperature and relative humidity data for job site monitoring.
 
 
 
 
 
 
WFP500+ Rapid RH® 5.0 Professional Flooring Installer Kit
 
  • The WFP500+ gives the professional installer the most advanced moisture testing technology for concrete, wood, and other building materials. Includes 2 Smart Logger™ ambient temperature and humidity recorders.
 
 
 
WFP500+ Rapid RH® 5.0 Professional Flooring
Installer Kit
 
  • The WFP500+ gives the professional installer the most advanced moisture testing technology for concrete, wood, and other building materials. Includes 2 Smart Logger™ ambient temperature and humidity recorders.
 
 
Concrete Moisture Test Starter Kit+
with Rapid RH® 4.0EX
 
  • This kit includes everything you need to easily get started, including 1 Easy Reader, 5 Smart Sensors (used for relative humidity testing), and 2 Smart Logger™ ambient temperature and humidity recorders.
 
 
 
 
 
 
WFP400+ Rapid RH® 4.0EX Professional Flooring
Installer Kit
 
  • The WFP400+ provides everything you need for accurate moisture testing of concrete, wood, or other building materials.
  • Includes 2 Smart Logger™ ambient temperature and humidity recorders.
 
 
WFP200+ Rapid RH® 4.0EX Advanced
Concrete Moisture Test Kit
 
  • The WFP200+ combines accurate moisture testing using the Rapid RH® 4.0 EX, wireless data transfer with the Bluetooth® Smart Reader, plus 2 Smart Logger ambient temperature and humidity recorders.
 
 
Rapid RH® 5.0 EasyCare CalCheck® (with 75% RH)
– 5 Pack
 
  • Make sure your Rapid RH® 5.0 Reusable Smart Sensors always have a patent-pending EasyCare CalCheck® unit for safe and easy storage
 
 
 
 
 
 
 
Smart Sensor Replacements for the Rapid
RH® 5.0 Reusable
 
  • Stay within the ASTM F2170 Standard of calibration with replacement reusable Smart Sensors for your Rapid RH® 5.0 Reusable Smart Sensor Kit.
  • We have you covered with 5-packs all the way up to packs of 100.
 
 
Rapid RH® 5.0 Base Packs
 
 
  • With extra bases, you're always ready to reuse your Rapid RH® 5.0 Reusable Smart Sensors.
 
 
Rapid RH® 5.0 Smart Sensor Sleeve Packs
 
  • Keep plenty of extra packs of Reusable Smart Sensor sleeves on hand so you always have what the job requires.
 
 
 
 
 
Rapid RH® 5.0 Sleeve Removal Tool
 
  • The Rapid RH® 5.0 extraction tool is designed specifically for your Rapid RH® 5.0 Reusable Smart Sensors.
 
 
Rapid RH® 5.0 Sensor Extraction Tool
 
  • This tool will remove the 5.0 Smart Sensor, without removing the sleeve from test hole.
 
 
Rapid RH® 5.0 Carrying Case (Large)
 
  • Holds all the Reusable Smart Sensors, sleeves, bases, and various tools and parts that come with the Rapid RH® WFP500 Reusable Pro Flooring Installer Package.
 
 
 
 
 
 
Rapid RH® 5.0 Carrying Case (Small)
 
  • Holds all the Reusable Smart Sensors, sleeves, bases, and various tools and parts that come with the Rapid RH® Reusable Complete Starter Kit.
 
 
Rapid RH® Carrying Case
 
  • It seems only fitting that the Rapid RH® Carrying Case should be as resilient as concrete.
 
 
Smart Sensor 5 Pack with Easy Reader for Rapid RH® 4.0EX
 
  • 5 Rapid RH® 4.0EX Smart Sensors and 1 Easy Reader. The Rapid RH® 4.0 EX Smart Sensors are factory calibrated using CMOSens™ technology. Each Smart Sensor pack comes with a NIST traceable calibration certificate.
 
 
 
 
 
Smart Sensor 5 Pack for Rapid RH® 4.0EX
 
 
  • If you already have our Rapid RH® 4.0 Easy Reader and just need a few more sensors, the Smart Sensor 5 pack is for you.
 
 
Smart Sensor Value Pack Replacement for Rapid
RH® 4.0EX
 
  • Need Smart Sensors in bulk? Choose from packs of 25, 50, and 100 Smart Sensors.
 
 
Rapid RH® 4.0 EX Additional Extensions
 
  • Package of 10 extensions.
 
 
Rapid RH® Protective Orange Caps
 
  • One bag of 10 Rapid RH® Protective Orange Caps. 
 
 
 
 
 
 
 
Rapid RH® Easy Reader
 
  • The removable Rapid RH® Easy Reader with our patented Touch-n-Sense™ technology allows you to take repeated readings from any Smart Sensor quickly and easily.
 
 
Rapid RH® Bluetooth® Smart Reader
 
  • With this versatile wireless device, you’re set for quick, accurate readings of relative humidity (RH) and temperature no matter which Rapid RH® system you use
 
 
 
 
 
 
Hilti One-Step Vacuum + Drill Bit
 
  • Use the TE-CD Hammer Drill Bit to get a 100% clean concrete hole prior to placing the Rapid RH® Smart Sensors at the correct depth for moisture testing.
 
 
Rapid RH® Digital pH Meter
 
  • Our Rapid RH® Digital pH Meter ensures accurate testing and unparalleled portability. Take this tool with you from job site to office in the included case.
 
 
Infrared Thermometer
 
  • For building inspectors as well as finished flooring and coating contractors, Wagner Meters’ Infrared Thermometer adds immediate and vital information for building inspections and flooring installations.
 
 
SDS Masonry Drill Bit
 
  • Knowing the importance of Rapid RH® assessment tools, masonry and concrete trade professionals rely on the Wagner Meters SDS Masonry Drill Bit.
 
 
 
 
 
 
Smart Sensor Insertion Tool
 
  • The Rapid RH® 4.0 EX Insertion Tool is newly designed to provide simpler, more ergonomic Smart Sensor insertion for relative humidity (RH) testing in concrete slabs with the Rapid RH® test method.
 
 
Vacuum Attachment
 
  • Designed specifically for removing concrete debris before installing the Rapid RH® 4.0 and 5.0 Smart Sensors. 
 
 
Wire Cleaning Brush
 
  • The Cleaning Brush was designed specifically for removing concrete debris before installing the Rapid RH® 4.0 Smart Sensors. 
 
 
pH Test Kit
 
  • Test the pH of your concrete slabs with this convenient pH Test kit that includes test strips and a 2 oz. bottle of distilled water.
 
 
 
TH-200 Thermo-Hygrometer
 
  • Measure temperature (F or C), relative humidity, and dew point before, during, and after your flooring installation and woodworking applications.
 
 
 
 
 
 
 

D-2-4, Setia Walk, Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia

Tel: + 6012-921 3877; 603-5879 7121
Fax: +018 635 1593
Email: ancor.my@gmail.com 
           sales@gasmonitors.com.my