Gas Monitor
Total Analytical Solution 
D-2-4, Setia Walk, Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia
 
Tel: + 6012-921 3877; 603-5879 7121
Fax: +018 635 1593
Email: ancor.my@gmail.com
            sales@gasmonitors.com.my
   Home      Status Scientific - MCU 3
 
 
 

Gas Detector Control Panel - 1 to 8 Channel

MCU Industrial Series Control Unit

For use with remote fixed gas detector heads or other environmental sensors.

 
 

Features

  • Can be used with the full range of Status Scientific Controls fixed gas detector heads - certified types require use of an integral safety barrier.
  • Graphical display with backlight with the ability to display trend data in graphical form.
  • Menu selection via push buttons on front panel.
  • Integral audible alarm.
  • Integral sealed lead-acid standby battery.
  • Integral safety barrier option for each channel.
  • 3 control relays per channel providing LOW, MEDIUM & HIGH alarm level contact outputs for each channel.
  • Common alarm relay contact outputs providing LOW, MEDIUM & HIGH alarms plus FAULT conditions on any channel to power external equipment.
  • Lockable door.
  • Water and dust proof to IP66.
  • Compatible with industry standard gas detectors and other sensors.

Description

Although primarily designed for use with the Status Scientific Controls range of fixed gas detectors, the MCU3 Monitoring and Control Unit provides facilities to accept up to 8 individual inputs from various types of monitoring instruments or transducers. A graphical display is provided to show the status of each channel, display graphs and enable configuration of the unit (e.g. set the alarm levels, program the output relay voting etc.). The unit can be programmed on-site by the user using the password protected configuration facility. Each monitoring channel provides relay contact outputs together with 4 to 20mA and voltage outputs. Data logging of each channel is provided as standard.

Internal Safety Barrier

Internal Safety Barrier

For applications where the gas detector heads (or other sensor type) are sited in a potentially explosive atmosphere, a safety barrier must be fitted to each individual channel in order to limit the maximum voltage and current under a fault condition (e.g. short circuit) such that an incendive spark cannot be created. Where suitable*, the internal safety barrier shown above may be fitted to each of the required channels within the control unit. This can either be fitted at the time of manufacture (where requested) or at a later time if the system is extended by the installation of additional detectors.

*Note that some installations may necessitate the use of external barriers sited at the safe area/hazardous area interface - see the accessories page.

D-2-4, Setia Walk, Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia

Tel: + 6012-921 3877; 603-5879 7121
Fax: +018 635 1593
Email: ancor.my@gmail.com 
           sales@gasmonitors.com.my