Gas Monitor
Total Analytical Solution 
D-2-4, Setia Walk, Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia
Tel: + 6012-921 3877; 603-5879 7121
Fax: +018 635 1593
   Home      Analox Instruments- Oxygen Sensor      Analox- HBOT
  • The ADM Aspida has high IP rating, easy calibration functions and datalogging functionality.
  • The ADM Aspida offers an amazingly affordable price point for a great specification.
  • With the option to add CO2 monitoring to the O2 to make a dual monitor, this compact solution is rapidly becoming the choice for HBOT chamber operators.
101D2 - HBOT
  • The 101D2 portable oxygen monitor is easy to operate and adjust and can be calibrated using fresh air.
  • This time-served, classic, battery powered oxygen monitor is easy to operate - if you’ve operated HBOT chambers in the last 20 years you’ve probably seen a 101D2 in action.
  • The CO Clear is designed to be installed inline on a breathing air compressor arrangement to warn the operator if there a potential contamination of carbon monoxide before it reaches the chamber.
  • It consists of a main sensor unit installed after the pressure has been regulated down to between 1 and 3BarG. 
  • Optional extras include a relay which could be used to switch off the compressor of sound a remote alarm.

  • The ACG+ is a fixed or portable air compressor monitor which continually monitors for O2, CO2, CO, VOC and dew point.
  • It has a port to run an oil mist test and datalogs for 90 days.
  • It continually monitors your breathing air for oxygen (O2), carbon dioxide (CO2), carbon monoxide (CO), dew point (H2O) and volatile organic compounds (VOC) and also has a separate port to check for oil mist.
  • The Safe-Ox+ is a simple to use and maintain ambient oxygen enrichment and depletion monitor comprising of a wall mounted main sensor unit and a repeater.
  • It is ranged from 0 to 25% and has 1 low and 1 high audio/visual alarm.
  • The sensor has a very long life and calibration is only required every 18 months and can be achieved using certified air.
  • The O2 Portable is often used as a cost-effective approach to continually monitor O2 levels from the hyperbaric chamber.
  • It also doubles up as a spot checker to check O2 levels in cylinders.
  • Monitoring O2 levels in the chamber and cylinders is vital to safe operations.

  • The SDA monitor provides a full-colour display of the reading taken from the following sensors: Oxygen (O2), Carbon Dioxide (CO2), Carbon Monoxide (CO), Helium (He), Volatile Organic Compounds (VOC), temperature/humidity and depth (or pressure). 
  • The alarm set points and calibration can be achieved using the front panel user interface and the SDA provides audio/visual alarms, optional data-logging and 4-20mA/relay outputs. 

  • Housed in a compact, rugged housing the HYP is simple to operate and accurately reads the pO2 from within the hyperbaric environment in line with safety requirements.
  • Classification bodies and industry guidelines require each hyperbaric chamber to have a means of providing independent pO2 monitoring in the event of the primary monitor failing.
  • The HBOT Aspida provides audio/visual alarms and readings of both Oand CO2 plus the unit can even datalog for event analysis.
  • HBOT Aspida can be used by the chamber operator to monitor the atmosphere or by the chamber occupants to do the same at pressures up to 3BarA.
D-2-4, Setia Walk, Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia

Tel: + 6012-921 3877; 603-5879 7121
Fax: +018 635 1593