Gas Monitor
Total Analytical Solution 
D-2-4, Setia Walk, Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia
 
Tel: + 6012-921 3877; 603-5879 7121
Fax: +018 635 1593
Email: ancor.my@gmail.com
            sales@gasmonitors.com.my
   Home      Control Panel
 RAE - FMC 64 
 
 
 
 
 
 
 
 
 
 
Gasflag
 
  • Gasflag is a control system for monitoring any 4-20mA flammable, toxic or oxygen gas detector.
  • Gasflag is ideally suited to light industrial or commercial applications such as LPG monitoring on garage forecourts, chlorine detection in swimming pool dosing rooms, or methane detection in boiler rooms.
  • Gasflag features a loud sounder, bright LED indicators and relays for switching external devices such as audible visual alarms or valves.
  • Loud internal audible alarm
  • Clear system integrity indication
  • Accepts industry standard 4-20mA inputs
  • Multiple units can be daisy-chained
  • Variable alarm configurations
  • Integral alarm outputs
  • Simple installation
  • Minimum maintenance
  • One button operation
 
 
 
 
 
 
Gasmaster
 
  • Crowcon's NEW and ENHANCED Gasmaster Control Panel has a modular design meaning users only need purchase the required number of input modules.
  • It can easily be extended by adding more modules at a later date.
  • All gas levels are displayed simultaneously - enables full systems status check at a glance
  • Alarm messages can be customised to indicate the name or location of any detector in alarm
  • The LCD can be set to display in many languages
  • Menu system is intuitive and easy to use - enables configuration changes to be made easily
  • All functions, from day-to-day operation to re-calibration, can be carried out from the front panel - routine testing can be performed rapidly
  • Event log feature - enables system fault and alarm history to be viewed
 
 
 
 
Vortex
 
  • Vortex is our most flexible control package that can be customised to meet your site requirements, however complex, without the need for extensive cabling.
  • 1 to 12 channels (including 3 for fire) - up to 12 devices can be monitored by reviewing just one control panel, saving time and manpower
  • Each channel has 1 fault level and 3 alarm levels which can be combined in any pattern to trigger up to 32 output relays - flexibility built in, initially configured to suit your operational needs, then channels/alarms are easily customised by you if requirements change
  • Can be factory set to your requirements.
  • Then when in situ, can easily be configured to suit your needs using Vortex PC software
  • Push buttons on front display - day-to-day operations are easily undertaken
  • LED display panel lights - faults are easily seen and whole system can be checked at a glance
 
 
 
Vortex FP
 
  • Vortex FP and Vortex FP Compact are ATEX certified Exd Flameproof control panels for use in Zone 1 or Zone 2 hazardous areas such as on offshore production platforms or within refineries
  • All the day-to-day operations can be completed via push buttons on the front panel - removing the requirement for hot-work permits to complete everyday tasks
  • Fault and alarm LEDs on the front panel - providing instant indication of system status
  • Alarm and channel settings can be adjusted at the panel
  • Available in two sizes, including a compact format - for use in areas where space is a limiting factor
  • Uses Vortex PC software - customisation is easy and user-friendly
  • Uses industry standard Modbus RTU (or optionally Profibus) communications links - simple to integrate with PLC, DCS or SCADA control systems
 
 
 
 
Gasmonitor
 
  • Gasmonitor Plus is Crowcon’s flexible 19" rack-based control system.
  • This microprocessor-controlled unit is used throughout the world, both onshore and offshore.
  • Gasmonitor Plus can monitor up to 16 gas detectors or 32 fire zones per rack.
  • Racks can be supplied separately, or built into wall mounting or floor standing enclosures.
  • A separate gas level display is provided for each gas detector.
  • Gasmonitor Plus can be engineered into very large systems and tailored to suit individual site requirements.
  • All day-to-day functions are available from the front panel - push buttons for simple operation
  • Unique bar-graph display per channel - provides instant representation of gas concentrations
  • Common alarm LEDs on the display card - the whole rack status can be checked at a glance.
 
 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
FMC-64
64 Channel Fixed Systems Controller
 
  • The FMC-64 fixed systems controller provides simultaneous display and alarm functions for up to 64 input variables with  operations set for 16, 32, 48 or 64 channels and I/O modules arranged in groups of 16 channels.
  • The easy-to-configure, user-friendly controller is ideal for centralizing display and alarm functions in critical multi-point monitoring applications.
 
 
 
 
 
 
 
FMC-60
MULTI-CHANNEL GAS CONTROLLER
 
  • The FMC-60 system operates on a 4 core (addressable) or 2/3 core (direct) cable network and has the capacity to monitor up to 64 addressable and 16 direct sensors of various gas types.
  • Each gas sensor continuously monitors the atmosphere, reporting any hazardous conditions to the control unit, for display by the alpha numeric screen indicating the reporting sensor, gas type, concentration and alarm status.

 
 
FMC-40
MULTI-CHANNEL GAS ALARM
 
  • The FMC-40 is a 1-4 channel gas alarm that has been designed to operate in the full range of environments from commercial premises through to heavy industrial applications which may require hazardous area sensing.
  • The FMC-40 system operates on single channels plug and play cards.
 
 
 
 
 
 
 
FMC-16
16 CHANNEL FIXED CONTROLLER
 
  • The FMC-16 fixed systems controller provides simultaneous display and alarm functions for up to 16 monitored variables.
  •  Easy to configure and user friendly, the FMC-16 can function as a critical alarm controller for toxic or combustible gases.
  • The controllers are easy to install and feature a large graphical LCD display and non-intrusive user interface for hazardous areas.
 
 
 
FMC-10
SINGLE POINT GAS ALARM UNIT
 
  • The FMC-10 has been designed to operate in the full range of environments from commercial premises through to heavy industrial applications which may require hazardous area sensing.
  • A fixed single point alarm unit that meets the requirements for economic and reliable monitoring of gas levels in a wide range of environments from commercial premises through to heavy industrial applications which may require hazardous area sensing.
 
 
 
 
FMC-2 & FMC-4
2 & 4 CHANNEL FIXED SYSTEMS CONTROLLER
 
  • The FMC-2 and FMC-4 controllers are designed to provide simultaneous display and alarm functions for two (FMC-2) or four (FMC-4) 4-20mA sensor transmitters.
  • Easy to configure and user friendly, they can function as critical alarm controllers for toxic or combustible gases. The controllers are easy to install and feature a large graphical LCD display, standard 4-20mA inputs, and non-intrusive inputs for hazardous areas.
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
SUPREMATouch Controller
 
  • The SUPREMATouch has been enhanced with several new features which makes it outstanding in its class.
  • Added to the popular large colour touchscreen display, a new title-based menu structure has been added to optimize intuitive operation.
  • The SUPREMATouch can be used with a wide range of detectors for combustible gas, toxic gas and oxygen. Output options include relays and 4-20mA outputs.
  • Remote racks can be connected (satellite structure), which expands control systems and reduces cabling costs.
  • Interfacing to external systems is provided by using Modbus or Profibus.
 
 
 
 
 
GasGard® XL Controller
 
  • Monitor up to eight remote gas sensors with the highly accurate wall-mounted GasGard XL Controller.
  • The sensor's large, multi-language LCD display provides real-time readings, offers full-system diagnosis and shows intuitive icons.
  • Housed in durable, fire-retardant ABS plastic, the controller is suitable for a variety of chemical, industrial and waste water environments.
  • The sensor also features a buzzer that sounds up to 85 db.
 
 
9010/9020 Controller
 
  • Monitoring up to 20 channels, it’s now also SIL 2 suitable.
  • The 9010 controller operates with one independent sensor, while the 9020 operates with two independent sensors per control module.
  • Each module comes with an independent AC/DC power supply for increased system reliability.
  • Both units feature full internal diagnostics, which minimize false alarms and unexpected down time.
  • The controller powers up the remote gas detectors, while its large four-digit LCD and LED provide crucial information such as gas concentration, alarm status and more.
 
 
 
Z-Gard® C 485 Controller
 
  • For wide-ranging gas-monitoring needs, the economical Z-Gard C 485 Controllers are up to the task.
  • The controllers connect with a wide array of MSA Z-Gard S Sensors, with controller models accepting up to 24 sensors.
  • Relay outputs indicate warning, alarm or sensor fail for each zone, and units are available with one or two zones.
  • A large LED readout displays the active channel and the corresponding sensor gas level.
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Beacon 110
 
  • Single Channel Wall Mount Controller
  • Low cost versatile solution
  • Compact, weatherproof, NEMA 4X enclosure
  • 115/220 VAC or 24 VDC operation
  • Long life sensors (2+ years typical)
  • Accepts RKI LEL/O2/H2S/CO direct connect sensors
  • Accepts any 4-20 mA transmitter
  • Audible alarm with reset button
  • Two programmable alarm levels
  • Built-in trouble alarm with relay
  • Relay rating 10 amps, form C
  • Provides 4-20 mA output
 
 
 
 
 
Beacon 200
 
  • Two Channel Wall Mount Controller
  • Simultaneous readout on 2 channels
  • Two alarm levels per channel
  • Discrete and common relays
  • NEMA 4X enclosure
  • 4-20 mA outputs
  • Proven, long-life sensors for a wide variety of gases
  • Accepts any 4-20 mA transmitter input (24 VDC)
  • Easy to install, operate and expand

 

 

 
 
 
 
 
 
 
 
 
Beacon 410A
 
  • Four Channel Wall Mount Controller
  • Simultaneously control up to 4 gas monitoring channels
  • OLED display of all 4 channels
  • LEL / O2 / CO2 / toxic direct connect sensors
  • Accepts any 4-20 mA transmitter, 2 or 3 wire
  • Up to 3 programmable alarm levels per channel
  • Up to 3 configurable alarm relays per channel
  • 4-20 mA analog & Modbus digital output standard
  • 115 / 220 VAC or 24 VDC operation
  • Audible alarm with silence feature
  • RFI / EMI Resistant
  • Alarm reset switch
  • Built in trouble alarm with relay
  • Weather and corrosion resistant NEMA 4X enclosure
 
 
 
Beacon 800
 
 
  • Eight Channel Wall Mount Controller
  • Capable of up to 8 separate channels
  • Digital display of all 8 channels simultaneously
  • Compact, weatherproof, NEMA 4X enclosure
  • 85 to 264 VAC or 24 VDC operation
  • Long life sensors (2+ years typical)
  • Accepts any 4-20 mA transmitter
  • Audible alarm with reset button
  • Two programmable alarm levels per channel
  • Common alarm and fail relays
  • Relay rating 3 amps, form C
  • Low cost versatile solution

 
 
 
RM-5000 Multi Gas Monitor System
 
 
  • Bar meter and digital multi-indication
  • High level of visibility
  • Low power consumption
  • Support RS-485 communication function
  • Global standard
  • Combatible with RM-570A/580 series
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
MCU1
 
  • Gas Detector Control Panel - 1 Channel
  • Integral sensor options comprise CO2 (Infrared), oxygen, or a wide range of toxic sensors. 
  • Can be used with the full range of Status Scientific
  • Controls fixed gas detector heads - certified types require use of an integral safety barrier. 
  • Green, amber and red flashing indicators in lens section. 
  • Alphanumeric display with backlight. 
  • Full calibration menu via external push buttons. 
  • Integral audible alarm. 
  • Internal sealed lead-acid standby battery. 
  • Internal safety barrier option. 
  • Lockable door. 
  • Water and dust proof to IP66. 
  • Compatible with industry standard gas detectors and other sensors. 
  • For installation only in non-explosive atmospheres.
 
 
 
 
MCU3
 
  • Gas Detector Control Panel - 1 to 8 Channel
  • Can be used with the full range of Status Scientific Controls fixed gas detector heads - certified types require use of an integral safety barrier. 
  • Graphical display with backlight with the ability to display trend data in graphical form. 
  • Menu selection via push buttons on front panel. 
  • Integral audible alarm. 
  • Integral sealed lead-acid standby battery. 
  • Integral safety barrier option for each channel. 
  • 3 control relays per channel providing LOW, MEDIUM & HIGH alarm level contact outputs for each channel. 
  • Common alarm relay contact outputs providing LOW, MEDIUM & HIGH alarms plus FAULT conditions on any channel to power external equipment. 
  • Lockable door. 
  • Water and dust proof to IP66. 
  • Compatible with industry standard gas detectors and other sensors. For installation only in non-explosive atmospheres.
 
 
 
 
MCU4
 
  • Gas Detector Control Panel - 1 To 16 Channel
  • Can be used with the full range of Status Scientific Controls fixed gas detector heads - certified types require use of an integral safety barrier. 
  • Graphical displays with backlight with the ability to display trend data in graphical form. 
  • Menu selection via push buttons on front panel. 
  • Integral audible alarm. 
  • Integral sealed lead-acid standby battery. 
  • Integral safety barrier option for each channel. 
  • 3 control relays per channel providing LOW, MEDIUM & HIGH alarm level contact outputs for each channel. 
  • Common alarm relay contact outputs providing LOW, MEDIUM & HIGH alarms plus FAULT conditions on any channel to power external equipment. 
  • Lockable door. 
  • Water and dust proof to IP66. Compatible with industry standard gas detectors and other sensors
 
 
 
 
 
 
 
 
 
 
 
 
 

  • Honeywell’s Touchpoint Pro makes gas control system design, installation, configuration and operation simple.
  • Intuitive and flexible, Touchpoint Pro offers optimum compliance, safety and productivity for sites.

 
 
Manning GM-JR
 
  • Innovative, standalone readout/alarm unit that can be configured in a variety of ways to solve many refrigeration-gas concentration and alarm needs.
  • 20-segment calibrated bar graph 
  • Power-up delay
  • Fail-safe design
  • Easy trip setting
  • Relay output is time delayed
  • Downscale alarm configuration available for oxygen
  • Rugged NEMA 1, gasketed steel enclosure
 
 
 
 
 
 
Touchpoint Plus Controller
 
  • Touchpoint Plus is an easily configurable, wall mounted control system that supports up to sixteen channels of gas detection.
  • Its intuitive user interface and modular approach enables you to take control of your safety system and configure it to meet your needs for a wide range of applications.
  • Quick and easy setup and use
  • Intuitive touchscreen user interface
  • Traffic light style status at a glance
  • Ergonomic industrial design
  • Suited to a wide range of industries
 
 
 
Touchpoint Pro Controller
 
 
GDVS - Gas Detection Visualisation Solutions
 
  • A software and hardware solution to enable 24/7 remote access of your gas detection Real-Time information, GDVS provides unique flexibility and possibilities of customisation.
  • With GDVS you can visualise the gas detection transmitters’ status and gas concentration trend.
  • The solution may be easily installed on almost any PC or mobile device, such as tablets and smartphones.
  • Fits a broad variety of existing Honeywell products (e.g. System 57, Touchpoint Pro, XNX / Modbus, Midas / Modbus, SPM Flex etc)
  • Quick and easy setup and use
  • Suitable for a wide range of industries
  • Seamlessly integrates with different computers and mobile devices
  • Razor-sharp images.

 
 
Manning AirAlert 96d
 
  • Acting as the nerve center of a modular gas detection network, this multichannel system provides continuous monitoring of up to 96 sensors.
  • Simple push-button program facilitates adjustment
  • Supports any combination of Honeywell Analytics gas sensors
  • Immediate, at-a-glance status
  • Supports up to 96 network devices
  • Easily fine-tune applications ranging from minor operational sequences to reconfiguration of entire network
  • Simple push-button program facilitates adjustments
  • Supports any combination of Honeywell Analytics gas sensors, including NH3, CO2, H2, CO, Cl2, CFC’s, HCFC’s, HFC’s, CH4, O2, NO2, and more

 
 
HA71 Digital Gas Controller
 
  • Simultaneous display and alarm functions for up to 16 input variables, and can expand with 10 additional HA71 units to provide up to 160 points of gas detection.
  • Trouble-free operation with menu-driven calibration
  • Three adjustable alarm levels per channel
  • Improved drift and temperature compensation
  • Display: 128 x 64 pixel graphic LCD with backlight displays
  • Power requirement: 100-240 VAC / 24 VDC
  • Operating temperature: -25°C to +50°C
 
 
 
 
 
  • 4-channel gas detection system with configurable control, flexible application and user-friendly operation.
  • Accepts inputs from up to two 4-20mA sensors transmitters
  • Touch & magnetic keyboard for nonintrusive operation
  • 3 independent alarms per channel
  • Display: 128 x 64 pixel graphic LCD with backlight displays
  • Power requirement: 100-240 VAC / 24 VDC
  • Operating temperature: -25°C to +50°C
 
 
 
HA20 Digital Gas Controller
 
  • 2-channel gas detection system with configurable control, flexible application and user-friendly operation.
  • Accepts inputs from up to two 4-20mA sensors transmitters
  • Touch & magnetic keyboard for nonintrusive operation
  • 3 independent alarms per channel
  • Display: 128 x 64 pixel graphic LCD with backlight displays
  • Power requirement: 100-240 VAC / 24 VDC
  • Operating temperature: -25°C to +50°C
 
 
 
 
HA72 Controller
 
  • Centralize display and alarm functions with a flexible 16-64 channel controller that works as a standalone solution or networkable device
  • Configurable to accept inputs from many sensor types and signal ranges
  • Full array of visual indicators: bar graphs, multicolor cells, flashing icons
  • Touch & magnetic keyboard for nonintrusive operation
  • Display: QVGA 320 x 240 pixel graphic LCD with backlight
  • Power requirement: 10 – 30 VDC (24 VDC nominal) 12 Watts max
  • Operating temperature: -13°F to +140°F (-25°C to +60°)
 
 
 
 
 
 
Unipoint Controller
 
  • DIN rail mounted controller allows you to incorporate flammable, toxic or oxygen gas detection into control systems.
  • User friendly with ultra-clear backlit display
  • TS35 (‘top hat’) DIN rail mounting
  • Compatible with a wide range of gas detectors
  • System status codes
  • Built-in audiovisual alarms
  • Intuitive menu system
  • Simple pushbutton operation
  • Remote accept, reset and inhibit inputs
 
 
 
 
 
 
 
 
 
 
 
 
D-2-4, Setia Walk, Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia

Tel: + 6012-921 3877; 603-5879 7121
Fax: +018 635 1593
Email: ancor.my@gmail.com 
           sales@gasmonitors.com.my