Gas Monitor
Total Analytical Solution 
D-2-4, Setia Walk, Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia
 
Tel: + 6012-921 3877; 603-5879 7121
Fax: +018 635 1593
Email: ancor.my@gmail.com
            sales@gasmonitors.com.my
   Home      Portable - Single Gas Detector
           
 
 
 
 
 
 
 
 
 
 
 
 
 
Single Gas Clip Infrared
 
  • Unmatched sensor reliability for hydrogen sulfide H2S, carbon monoxide CO, and oxygen O2
  • Adjustable alarm set points
  • Real-time gas reading capability
  • 0.1 ppm resolution for H2S sensor and display
  • Two-way IR communication for event downloads, bump tests, detector configuration and firmware updates
  • Programmable unique 6 digit detector identification
  • Bump Test notification and confirmation when intervals are set
  • Simple one button operation
  • Calibration notification and confirmation when intervals are set
  • Docking capability with Gas Clip Technologies SGC Dock
 
 
 
 
Single Gas Clip Plus Infrared
 
  • Unmatched sensor reliability for hydrogen sulfide (H?S) and carbon monoxide (CO)
  • “Hibernate” mode
  • Adjustable alarm set points
  • Real-time gas reading capability
  • 0.1 ppm resolution for H2S sensor and display
  • Two-way IR communication for event downloads, bump tests, detector configuration and firmware updates
  • Programmable unique 6 digit detector identification
  • Bump Test notification and confirmation when intervals are set
  • Calibration optional
  • Calibration notification and confirmation when intervals are set
  • Docking capability with Gas Clip Technologies SGC Dock
 
 
 
 
Single Gas Clip Dock
 
  • Test 4 detectors at one time, up to 12 instruments in a minute
  • Easy 1 button operation
  • Robust rechargeable internal battery, hundreds of tests before recharging
  • Internal gas cylinder regulator and pressure gauge
  • 2 GB USB memory for bump test and event log storage
  • Optional detector configuration and firmware updates via GCT Manager Software
  • Rugged Pelican© case or Wall Mount Dock
  • No computer required to operate
 
 
 
 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 
 
BW Clip Series
 
  • Available in a two-year or three-year version for H2S or CO
  • Available in a two-year version for O2 or SO2
  • Unique hibernation case extends service life for the two-year H2S or CO
  • Compact, lightweight and easy to use — with one-button operation and no extensive training
  • Automated internal test for improved safety
  • Automatically logs the 35 most recent gas events for easy, accurate recordkeeping 
  • Device management with Honeywell SafetySuite
  • Both detectors are compatible with the IntelliDoX instrument management system for extremely quick bump tests, bump test tracking, adjustable set points and more.
 
 
 
 
 
 
 
GasAlert Extreme
 
  • Equipped with internal vibrating alarm for high noise areas
  • Secure and accurate history with datalogging option
  • Multi-language support in English, French, German, Spanish, and Portuguese
  • Alarms: visual, vibrating, audible (95dB)- Low, High, TWA and STEL
  • Tests: Sensor integrity, circuitry, battery and audible/visual alarms on activation, battery (continuous)
  • Pump: Compatible with the Sampler motorized pump
  • Typical battery life:1.5 year battery life (typical) with replaceable 3V battery
 
 
Honeywell BW™ Solo
 
  • User-friendly operation
  • Easy-to-read display for multiple languages
  • Lightweight convenience
  • Ease of maintenance
  • Serviceability
  • The new 1-Series sensor for enhanced reliability
  • Connected Bluetooth Low Energy (BLE) capabilities
  • High standards of sensor quality and reliability
  • The easiest single-gas detector to service
  • The first single-gas detector with the 1 Series sensor for CO, H2S and O2
  • Complete with an extensive selection of sensor options
  • Compatible with IntelliDoX
 
 
SAMPLERPAK
 
  • Reliability plus flexibility
  • Quick and easy compliance - automatically maintain accurate records
  • Sample gas from remote locations
  • Leak test ensures clean and proper draw
  • Easily compatible with all BW Technologies by Honeywell diffusion units
  • Continuous self-test ensures proper functionality
 
 
 
MICRODOCK II
 
  • Cost effective calibration & bump test management
  • Quick and easy compliance - automatically maintain accurate records
  • Automatic bump testing, calibration, record keeping and charging
  • One base station with one AC outlet supports up to six modules to suit your application
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Clip SGD Single Gas Detector
 
  • Changeable alarm levels - ensures compliance with changing regulations or company procedure
  • Clip SGD docking station - keeps monitors correctly configurated without service or technical team
  • 'Bump test due' indication - alerts the user and team members that the monitor is not compliant
  • Compact and lightweight - non-intrusive and comfortable to wear
  • Single button operation - delivers simplicity for users and reduces training time
  • Wide operating temperature range - effective in a wide range of harsh environments
  • Water and dust resistant to IP66 and IP67
 
 
 
 
 
 
 
 
 
Gasman Portable Detector
 
  • Tough polycarbonate housing - protects you in the harshest environments
  • Water and dust resistant to IP65Full overmoulding - high impact resistance
  • 2 levels of instantaneous alarm and TWA alarms for toxic versions - ensures prompt evacuation from hazardous zone
  • 95dB audible alarmVivid twin red/blue visual alarm - if ambient noise is high, Gasman alerts you by vibrating and with the high impact blue/red LED alarms
  • Internal vibrating alarm
  • Versions available for flammable gas, oxygen and toxic gases - gas detector tailored to your requirements
  • Rechargeable versions for all gas types
  • Non-rechargeable versions for oxygen and toxic gases
  • Real-time TWA and peak display options
  • Fully interchangeable intelligent sensor modules
  • One button operation - quick and easy to use
  • Backlit display for gas diagnostics and operating status - easy to read
  • Ultra lightweight; just 85g for toxic versions - comfortable to wear
 
 
 
 

 
 
 
 
 
 
 
 
 
Dräger Pac® 3500
 
  • Workplace safety devices need to be fast and accurate.
  • That is why the Dräger Pac® 3500 is ideal for the personal monitoring of CO, H2S or O2
  • Along with being maintenance-free for up to two years.
  • The device is light-weight and compact while offering excellent wear comfort.
  • The stable, rotatable crocodile clip allows it to be securely attached to clothing or belts.
  • Dräger Pac 3500 also features a shock-proof, chemical-resistant rubber coating and meets the requirements of IP68, making it perfect for rough working environments.
 
 
 
Dräger X-am® 5100
 
  • Dräger X-am 5100 portable single-gas detector ensures safe handling of HF, HCl, H2O2 or hydrazine
  • Continuous, precise and reliable measurement
  • A special device design with direct gas entry provides fast sensor response and precise measurement data by preventing gas adsorption on the device housing
  • Lightweight and robust
  • Slip-proof and compact design
  • Triple alarm: visual (360°), audible (multi-tone), vibration
  • Easy to use: two-button operation and user-friendly menus
  • Highly resistant to impacts, vibrations and electromagnetic radiation
  • Can be operated using replaceable alkaline batteries or a T4 NiMH rechargeable battery, which can be charged right in the device

 

  
 
 
Dräger Pac® 5500
 
  • Long-lasting quality is key when it comes to workplace safety.
  • The Dräger Pac® 5500 has no lifetime limitation and is ideal for fast and accurate personal monitoring and detection of carbon monoxide, hydrogen sulphide or oxygen.?
  • The Dräger Pac 5500 can store up to 60 events, along with their dates and times.
  • Events such as activation and deactivation, gas and battery alarms, error modes and configuration adjustments can be loaded and analyzed on a PC via the infrared interface


 
Dräger Pac® 6000
 
  • The Dräger Pac® 6000 disposable personal gas detector measures CO, H2S, SO2 or O2 reliably and precisely, even in the toughest conditions.
  • The robust design, quick sensor response times, and a powerful battery ensure maximum safety for up to two years with virtually no maintenance required.
  • The D-Light indicates whether the functionality of the device has been tested and that it is ready to use.
  • The housing is also designed with your safety in mind: each sensor variant of the Dräger Pac 6000 features a clearly visible color coding, thereby minimizing the chance of mistakes.
 
 
 
 
Dräger Pac® 6500
 
  • The robust Dräger Pac® 6500 is your reliable companion under tough conditions.
  • The personal single-gas detection device measures CO, H2S, SO2 or O2 quickly and precisely.
  • Quick sensor response times and a replaceable battery also ensure safety.
  • The large display clearly indicates the respective gas concentration.
  • Other important information, such as the battery capacity, is also displayed.
  • The bright backlighting ensures that all values are clearly legible in the dark.
 
 
Dräger Pac® 7000
 
  • The Dräger Pac 7000 provides a reliable warning against dangerous concentrations of 12 different gases depending on the sensor selection.
  • Another unique option to the device is its five-year warranty for the H2S, O2 and CO versions.
  • The protective rubber on the Dräger Pac 7000 ensures that its casing is shock-proof and meets the strict dust and water protection requirements specified in IP68.
  • Also, the electromagnetic resistance has been optimized and Dräger designed the device for unlimited lifetime usage.
 
 
Dräger Pac® 8000
 
  • With the robust Dräger Pac® 8000, you'll be well equipped for tough conditions: this non-disposable, personal single-gas detection device is a reliable and precise instrument, which detects hazardous concentrations of twenty nine different gases, including special gases like NO2, O3 or COCl2.
  • The Pac 8000 can easily handle even extreme conditions.
  • The sensors can tolerate air pressures between 700 and 1,300 mbar.
  • A membrane filter protects the sensor from foreign matter such as dust and liquids.
  • The shock-proof, chemical-resistant housing meets the requirements specified by the IP68 standard rating.
 
 
Dräger Pac® 8500
 
  • The Dräger Pac® 8500 single-gas detection device is a reliable and precise instrument even under the toughest of conditions.
  • The detector can be equipped with a hydrogen-compensated CO sensor or a Dräger dual sensor.
  • The dual sensors provide the option of measuring two gases at once: either H2S with CO or O2 with CO.
  • The D-Light indicates whether functionality of the device has been tested and if it is ready to use.
  • The housing is also designed with your safety in mind: each sensor variant of the Dräger Pac 8500 features clearly visible color coding, thereby minimizing the chance of mistakes.
 
 
 

 
 
 
 
 
 
 
 
 
 
 
 
 

ToxiRAE 3

Single Gas Monitor for CO or H2S
 
 
 
  • Lowest cost of ownership on the market.
  • Rugged steel housing for harsh environments.
  • Fastest instrument response time on the market for better protection and worker safety.
 
 

ToxiRAE II

Personal Gas Monitor for Single Gas
 
 
 
  •  Large, easy-to-read continuous display of gas concentration in ppm
  • Displays STEL, TWA, and Peak values
  • Sensors available: H2S, CO, O2, NH3, Cl2, ClO2, HCN, NO, NO2, PH3, SO2
 
 
 

ToxiRAE Pro PID

Personal Wireless Gas Monitor for Volatile
Organic Compounds
 
  • Wireless access to real?time instrument readings and alarm status from any location (including Man Down Alarm)
  • Unmistakable five?way local and remote wireless notification of alarm conditions
  • 190 built?in PID correction factors
 
 
 
 
 
ToxiRAE Pro LEL
 
Personal Wireless Monitor for Combustible
Gases and Vapors
 
 

  • Wireless access to real?time instrument readings and alarm status from any location (including Man Down Alarm)
  • Unmistakable five?way local and remote wireless notification of alarm conditions
  • 34 built?in LEL correction factors
 

ToxiRAE Pro CO2

Personal Wireless Monitor For Carbon Dioxide
 
 
 
  • Wireless access to real?time instrument
    readings and alarm status from any location
    (including Man Down Alarm)
  • Unmistakable five?way local and remote
    wireless notification of alarm conditions
  • Largest display in its class
  • Reliable, rugged
 
 

ToxiRAE Pro CO

Personal Wireless Gas Monitor for Volatile

Organic Compounds
 
 
  • Wireless access to real?time instrument readings and alarm status from any location (including Man Down Alarm)
  • Unmistakable five?way local and remote wireless notification of alarm conditions
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
ALTAIR 2X GAS DETECTOR
 
             
  • Low cost of ownership
  • Increased safety awareness & real-time compliance
  • Full-time traceability
  • Rugged durability
 
 
 
 
 
 
ALTAIR SINGLE GAS DETECTOR
 
 
  • Sensor options for CO, H2S, and O2
  • Patented electrochemical sensors and MSA-built button sensors
  • Stainless steel and solid electrolyte construction virtually eliminate sensor leakage

 
 
ALTAIR PRO SINGLE GAS DETECTOR
 
 
  • Unit detects CO, H2S, O2, NH3, Cl2, ClO2, NO2, SO2, HCN and PH3
  • Gas concentration (ammonia, carbon monoxide, chlorine, chlorine dioxide, hydrogen cyanide, hydrogen sulfide, nitrogen dioxide, phosphine and sulfur dioxide) or percent oxygen displayed on a large, clear, backlit LCD
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
03 Series
 
  • Single gas monitors are designed for LEL, O2, H2S, or CO detection.
  • Individuals need personal protection in hazardous areas at all times without adding extra bulky equipment, and the 03 Series can provide that kind of protection at an affordable price.
 
 
 
SC-01
 
  • Smart interchangeable sensors
  • Wide range of toxic gases
  • Unique extender cable for remote monitoring
  • Compact
  • Lightweight, 7.6 ounces
  • 250 hours of continuous operation
  • Operates on 2 “AA” alkaline batteries
  • Audible / visual / vibration alarms
  • Datalogging standard
  • Impact resistant protective rubber boot
 

 
 
 
 
OX-07
 
  • Extension cable available
    (5m standard, 10m, 20m and 30m)
  • Maximum 5000 hours of continuous operation by 2 “AA” alkaline dry cells
  • Impact resistant protective rubber boot
  • Large LCD display with auto backlight
  • Audible/visual/vibration alarms
 
 
FP-31
 
  • Built-in sample draw pump
  • Photoelectric photometry technology
  • Direct digital readout
  • Colorimetric detection tablet method
  • No false readings from interfering gases
  • Operates on 4 AA
  • Stores 99 readings
  • No warm up time
 
 
P-200 Series
 
  • Fast Response
  • Light Weight
  • Rugged Construction
  • Simple to Operate
  • Field Proven Dependability
 
 
 
 
 
 
 

 
 
 
 
 
 
 
 
G-TECTA SG
 
  • Fully functional premium single gas instrument, water and dust resistant, with one button operation and a choice of 28 sensors to suit almost every application.
  • The lightweight and robust design combined with full download and data logging capability offers the ideal single gas solution for both operators and engineers across all industries.
 
 
 
     
 
G-TECTA SG2
 
  • Offers the user a simple to use, low maintenance disposable gas detector with a warranted 2 year life.
  • Designed to resist the most arduous environments and to be used with basic training, the G-TECTA SG2 is ideal for contract work and where limited functionality is a requirement.

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
SNIFIT + PERSONAL SAFETY MONITOR
 
CO
 
  • Instant and continuous CO monitoring
  • Measurement range of 0-2,000 ppm
  • LED visual, audible and vibrating alerts for low/high, TWA and STEL conditions.
 
 
 
 
 
 
 
MONOXOR PLUS
 
CO
 
  • Advanced Carbon Monoxide Analyzer
  • Instantly, accurately measures CO (0 - 2,000 ppm in 1 ppm increments)
  • Detachable probe for direct flue gas sampling
  • Stores up to 10 records, printer available
 
 
 
 
SNIFIT 50
 
LOW LEVEL CO
 
  • CO Analyzer
  • Ideal for ambient air safety checks on residential appliances, home inspection, and HVAC service
 
 
 
 
 
 
 
 
 
COMFORT CHEK 400
 
CO2
 
  • Portable Air Quality Monitor
  • Low cost and easy to use indoor air quality monitor (IAQ) designed with three sensors that simultaneously measure and record temperature, relative humidity, and carbon dioxide levels in air
 
 
 
 
 
 
 
 
 
 
 
 
 
 
MICRO IV
 
O2, H2S, CO, NO, NH3, HCN, HCl, SO2, H2, C2H4O, SiH4, PH3, THT, HF, COCl2, NO2, Cl2, O3, ClO2
 
  • Data-logging
  • Infrared interface for data communication to Dockingstations
  • Continuous storage of data without PC
  • Continuous display of gas concentration
  • Up to 6 months continuous operation with only one AA battery
  • Simple bump check and calibration via the Dockingstation (option)
 
 
 
 
 
 
 
 
 
 

 
 
 
 
TOXIPRO
 
O2, CO, H2S, SO2, CO-H, Cl2, NH3, NO2, PH3, HCN
 
  • IP66/IP67 rated protection against dust and water ingress
  • Over-molded boot
  • One button operation
  • Large display (backlit)
  • Loud alarm – 10% louder than previous model
  • High Visibility Yellow and Red alarm LED(s)

 
 
 
 
 
 
                                         
D-2-4, Setia Walk, Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia

Tel: + 6012-921 3877; 603-5879 7121
Fax: +018 635 1593
Email: ancor.my@gmail.com 
           sales@gasmonitors.com.my