Gas Monitor
Total Analytical Solution 
D-2-4, Setia Walk, Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia
 
Tel: + 6012-921 3877; 603-5879 7121
Fax: +018 635 1593
Email: ancor.my@gmail.com
            sales@gasmonitors.com.my
   Home      Analox Instruments- Oxygen Sensor      Analox- Laboratory
 
 
 
LABORATORY
 
Analox offer a wide variety of highly accurate process sensors which can be used with our control panel 
 
 
 
STAFF SAFETY
 
 
Analox can offer a wide range of fixed and portable gas detection systems to ensure the safety
 
 
 
 
AX60 - LABORATORY
 
  • The Ax60 is a wall mountable carbon dioxide (CO2) detector.
  • The Ax60 allows multiple placement of alarm and sensor units which are connected to a central display.
  • Each alarm unit is equipped to provide an early warning of increased CO2 levels including an audible sounder and a high-intensity LED strobe light - perfect for warning of danger in noisy environments. 
 
 
O2NE+ - LABORATORY
 
  • The O2NE+ is an ambient oxygen depletion monitor comprising of a wall mounted main sensor unit and a repeater.
  • It is ranged from 0 to 25% and has 2 low audio/visual alarms.
  • The sensor has a very long life and calibration is only required every 18 months and can be achieved using certified air.
 
 
SAFE-OX+ - LABORATORY
 
  • The Safe-Ox+ consists of a wall mounted main sensor unit and a repeater.
  • It is ranged from 0 to 25% and has 1 low and 1 high audio/visual alarm.
  • The sensor has a very long life and calibration is only required every 18 months and can be achieved using certified air.
  • The Safe-Ox+ is a simple to use and maintain ambient oxygen enrichment and depletion monitor for monitoring enriched oxygen in a laboratory environment.
 
 
LC COMMERCIAL - LABORATORY
 
  • The LC Commercial has a graphical display and is ideal for laboratories which use a variety of gases or have multiple points to monitor.
  • The LC Commercial series comprises one, two and four channel mains-powered monitoring and control units for use with the various ranges gas detector heads such as the FGD3 and 3000SI.
 
 
FGD3 - LABORATORY
 
  • The FGD3 Flammable Gas Detector uses 'pellistor' technology to detect a wide range of hydrocarbons, fuel gases and hydrogen.
  • The sensor can be set to detect either methane or general hydrocarbons.
  • Pellistor sensors can be fitted to detect hydrocarbons over the range 0 to 100% Lower Explosive Limit (LEL) or 0 to 100% Volume gas.
  • The detectors use the industry standard 4-20mA current loop to convey the gas levels detected to a control unit such as the LC Commercial.
 
 
3000SI - LABORATORY
 
  • The 3000SI range offers a comprehensive offering of robustly housed Zone 0 rated analogue sensors ideal for integration into a breathing air compressor or system.
  • The 3000SI range includes (but is not limited to) CO, O2, NH3, Br2, NO2, H2, SO2, O3, HCN, F2, ClO2, H2S and Cl2 all providing a 4-20mA output.
 
 
ASPIDA - LABORATORY
 
  • The Aspida is a robust, high specification personal monitor which can be worn on a belt or even wall mounted as a backup to a primary CO2 or Osafety system.
  • Offering audio/visual alarms, data logging and a man down alarm for individual lab workers.
  • The Aspida is available as a stand-alone CO2 or O2 monitor, or as a dual CO2/O2 monitor, ideal where a combination of CO2/O2 and inert gases are used.
 
 
 
A50 - LABORATORY
 
  • The A50 consists of a wall mounted main sensor unit and a repeater.
  • It is typically ranged from 0 to 5% and has 2 audio/visual alarms.
  • The sensor has a 15-year warranty and the unit is almost zero maintenance and is ready to be installed out of the box.
  • Optional relays and 4-20mA output are ideal for integration into a larger system
 
 
 
 
 
 
 
 LABORATORY PROCESS GAS DETECTION SOLUTIONS
 
Whether you have a scientific, medical, research or educational laboratory, process monitoring is key to your success.
 
 
 
 
 
TCO - LABORATORY
 
  • The Analox trace carbon monoxide (TCO) analyser uses the stability of a laser for low-level carbon monoxide measurements. 
  • The use of a sophisticated laser-based measurement allows long calibration intervals, excellent noise performance and intrinsic linearity, coupled to long operation life and low maintenance requirements which can all be performed by the user.
 
 
 
SDA OXYGEN - LABORATORY
 
  • Is a panel or rack mountable atmosphere monitor.
  • The alarm set points and calibration can be achieved using the front panel user interface and the SDA provides audio/visual alarms, optional data-logging and 4-20mA/relay outputs. 
  • The monitors interface with state of the art sensors including our MEC and 5S3 highly stable and accurate sensors.

 
 
5S3 - LABORATORY
 
  • This highly precise, stable and accurate dual beam infrared CO2 sensor supplied in an aluminium housing includes an onboard, barometric pressure sensor compensating for the effect of atmospheric pressure. 
  • It is available in a variety of ranges from 0-5000ppm to 0-100% and can provide either a 0 to 2v or 4-20mA output.
 
 
MIR - LABORATORY
 
  • This digital CO2 sensor offers RS485 or TTL communications, all in a small and compact case.
  • This miniaturised dual-channel InfraRed carbon dioxide sensor uses our latest micro-controller technology with the benefits of very low power consumption.
 
 
MEC - LABORATORY
 
  • The MEC range includes (but is not limited to) CO, O2, VOC, He, NH3, Br2, NO2, H2, SO2, O3, HCN, F2, ClO2, H2S and Cl2 all providing an RS485 output using Analox protocol.
 
 
 
 
 
 
 
 
D-2-4, Setia Walk, Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia

Tel: + 6012-921 3877; 603-5879 7121
Fax: +018 635 1593
Email: ancor.my@gmail.com 
           sales@gasmonitors.com.my