|
|
Moisture Analyzers and Hydrocarbon Dew-Point Analyzers
Rugged and reliable process analyzers to suit your application
Hydrocarbon and Water Dew Point in Natural Gas Analyzers
Condumax II On-Line Hydrocarbon
Dew-Point Analyzer
- Fully automatic on-line analysis
- Objective, highly repeatable measurements
- 0.5°C hydrocarbon dew-point accuracy
- Fundamental chilled mirror principle
- Patented detection technique
- Self-cleaning
- No purge or cooling gas required
- Optional water dew-point analysis
|
Condumax II Transportable
Water & Hydrocarbon Dew-Point Analyzer
- Field transportable self-contained dew-point analyzer system
- Simultaneous HC and water dew-point measurements in a single analyzer
- Automatic objective measurements by industry proven principles
- Parameter specific sensors ensure continuity of HC and water dew-point readings
|
Condumax II and OptiPEAK TDL600
Combined Hydrocarbon Dew Point and Moisture Analyzer for Natural Gas Transmission Pipeline Quality
- Hydrocarbon dew point (HCDP) and moisture are key quality parameters to
ensure the quality of pipeline transmission gas.
- With the combined
Condumax II and OptiPEAK TDL600 analyzer system pipeline operators have
the assurance of the most widely accepted automatic hydrocarbon dew
point analyzernalyzer system.
|
Moisture in Gases Analyzers
QMA401
Trace Moisture Analyzer
- Precision measurement from 0.1 to 2000ppmV
- Simple, low cost, on-site maintenance
- Accuracy of 0.1ppmV or 10% of reading, whichever is greater
- Reliable measurement even in varying sample conditions — analyzer corrects automatically for flow variation
|
QMA601
Process Moisture Analyzer
- Fast and reliable measurement from 0.1 to 2000ppmv
- Accuracy of ±0.1ppmv at <1ppmv and 10% of reading from 1 to 2000ppmv
- Maintenance-free for 3 years
- Built-in verification of customer process gas
|
Promet EExd Process
Moisture Analyzer
- EExd flameproof certified - IECEx, ATEX, CCSAUS and TC TR Ex
- Complete hazardous area installation
- Single- or dual-channel measurement
- Moisture content, dew point and pressure
- Calibration traceable to NPL (UK) and NIST (USA)
|
Promet I.S. Process
Moisture Analyzer
- Simple, cost efficient operation and low-maintenance
- Immune to chemical attack from H2S, mercaptans and other sulphides
- Protected against glycol or other liquid contaminants
- Accurate direct dew-point measurement at process pressure up to 45 MPa
|
OptiPEAK TDL600
Moisture in Natural Gas Analyzer
- D-MET system: Factory-ready for varying gas compositions.
For example, after stream blending or injection of shale gas or
biomethane to a network.
- Operating range down to 1 ppmV
- Sour gas compatible
- Simple installation and setup
- Lowest maintenance
|
|
Moisture in Liquids Analyzers
Liquidew I.S. Moisture in
Liquid Analyzer
- Simple, cost-efficient operation and low maintenance
- Retrofit functionality, easy to integrate into existing sampling or distribution systems
- High integrity moisture in liquid measurement from 0.01 ppmW to saturation point
- Multi-channel with up to four completely independent measurement channels
- Robust design for undisturbed operation in many non-polar liquids over a long time
|
Liquidew EExd Moisture in
Liquids Analyzer
- EExd flameproof certified - IECEx, ATEX, CCSAUS and TC TR Ex
- Complete hazardous area installation
- Single or dual-channel measurements
- 0.001 ppmW to saturation range capacity
- Pre-programmed and user-entered saturation
concentration values
- Remote global access options
|
Monitors
Easidew I.S. and Easidew PRO I.S.
Intrinsically Safe Field Display
- Loop powered 4-20mA indicator. Intrinsically safe certified
with ATEX, IECEx, and FM
- Operating temperature between -40 and +70°C
- Bold 34mm high 4 digit display with optional backlight
- Robust GRP enclosure providing IP66 protection. Can be
mounted by itself or inside a sampling system enclosure
- Built-in terminal compartment for easy wiring
- Two optional galvanically isolated solid state alarm
outputs
|
|
|
|
|
D-2-4, Setia Walk, Pusat Bandar Puchong,
47160 Puchong, Selangor,
Malaysia
Tel: + 6012-921 3877; 603-5879 7121
Fax: +018 635 1593
Email: ancor.my@gmail.com
sales@gasmonitors.com.my |
|
|
|
|