|
|
GAS SAFETY IN LABORATORIES
MEDICAL GAS DETECTOR
AX60+ MULTI GAS UNIT FOR
LABORATORIES
- The Ax60+ is a wall-mountable multi gas monitor for detecting carbon dioxide with an option for monitoring oxygen
- Alarm set-points can be fully customised by the user to adhere to specific local regulations.
- The O2 sensor available to order now, provides an early warning of both oxygen depletion and oxygen enrichment.
|
O2NE+ - OXYGEN DEFICIENCY
MONITOR
- The O2NE+ is an ambient oxygen deficiency monitor comprising of a wall
mounted main sensor unit and a repeater.
- It is ranged from 0 to 25% and
has 2 low audio/visual alarms.
- The sensor has a very long life and
calibration is only required every 12 months and can be achieved using
certified air.
|
SAFE-OX+ - OXYGEN ENRICHMENT
& DEPLETION MONITOR
- The Safe-Ox+ oxygen enrichment and depletion monitor consists of a wall
mounted main sensor unit and a repeater.
- It is ranged from 0 to 25% and
has 1 low and 1 high audio/visual alarm.
- The sensor has a very long life
and calibration is only required every 12 months and can be achieved
using certified air.
|
ASPIDA - CARBON DIOXIDE AND OXYGEN
PORTABLE MONITOR
- The
Aspida is a robust, high specification personal monitor which can be
worn on a belt or even wall mounted as a backup to a primary CO2 or O2 safety system.
- Offering audio/visual alarms, data logging and a man down alarm for individual lab workers.
- The Aspida is available as a stand-alone CO2 or O2 monitor, or as a dual CO2/O2 monitor, ideal where a combination of CO2/O2 and inert gases are used.
|
CO2BUDDY
PORTABLE CO2 METER
- Extremely lightweight: max weight 70g
- Rechargeable battery
- User-friendly: Single-button operation
- Most common alarm set points pre-configured
- Fresh air calibration
- Alarm indicators: Audible, visible, and vibration
- IP54
- Maximum relative humidity - 95% RH (Non-condensing) Temperature - 0 to 40°C (32 to 104°F)
|
Data Output Module for Ax60+
- Analox’s newest addition to the flexible muliti gas system, the Ax60+ is the Data Output Module.
- This accessory provides signals to output real-time activity of sensors via a 4-20mA and MODBUS RTU communication to a remote system such as a central control panel, a Building Management System (BMS), or any appropriate device.
|
Laboratory Process Gas Detection Solutions
- The
SDA O2 is a panel or rack mountable atmosphere monitor.
- The alarm set
points and calibration can be achieved using the front panel user
interface and the SDA provides audio/visual alarms, optional
data-logging and 4-20mA/relay outputs.
- The monitors interface with
state of the art sensors including our MEC and 5S3 highly stable and accurate sensors.
|
5S Mk III CARBON DIOXIDE SENSOR
- This highly precise, stable and accurate dual beam infrared carbon dioxide (CO2) sensor is ideal for integration into a CO2 incubator or other gas cabinet.
- This highly precise, stable and accurate dual beam infrared carbon
dioxide sensor supplied in an aluminium housing includes an onboard,
barometric pressure sensor compensating for the effect of atmospheric
pressure.
|
MEC - GAS DETECTION SENSOR
- The MEC sensor range includes Oxygen, Helium, Carbon Monoxide and
Volatile Organic Compounds, all providing an RS485 output using Analox
protocol.
|
|
|
|
|
D-2-4, Setia Walk, Pusat Bandar Puchong,
47160 Puchong, Selangor,
Malaysia
Tel: + 6012-921 3877; 603-5879 7121
Fax: +018 635 1593
Email: ancor.my@gmail.com
sales@gasmonitors.com.my |
|
|
|
|