|
| Home |  | Fixed Gas Detector | |
|
|
|
|
F-GAS DETECTOR
- A high quality infrared fixed-point detector that delivers dependable detection of freon gases
- Available for detecting a range of different refrigerant gases and also sulphur hexafluoride (SF6)
|
XgardIQ
- Intelligent and versatile gas detector and transmitter.
- Designed to minimise the time operators must spend in
hazardous areas.
- XgardIQ is compatible with Crowcon's full range of
sensor technologies
|
XGARD
- Detectors for flammable, toxic and oxygen gases
- Comprehensive selection of fixed point gas
detectors that meet the diverse requirements for gas detection in
industries throughout the world.
|
XSAFE
- Robust flammable gas detector for non-hazardous areas
- Features a tough alloy housing and the same standard of design and
reliability as Crowcon hazardous area detectors but without the extra
cost of certified electronics.
|
- Toxic and oxygen gas detector with display
- Intrinsically Safe (I.S.) toxic and oxygen gas detector with local LCD
display.
- A very wide choice of sensors are available for use in a
variety of applications.
|
TX GARD PLUS
- Flammableproof proof toxic & oxygen gas with display
- TXgard Plus is a flameproof (Ex d), ATEX and UL certified toxic or oxygen gas detector with local LCD display.
|
FLAMGARD PLUS
- Flammable gas detector with display
- Flameproof (Exd) flammable gas detector which uses poison-resistant
pellistors
- Detect explosive levels of hydrocarbons, hydrogen and
other flammable gases and vapours, including aviation fuel and leaded
petrol vapours.
|
- IR & UV based flame detectors
- Depending on
model, this includes a variety of gas and fuel fires including those
generated from hydrocarbons, hydrogen, metals, inorganic and hydroxyl sources.
|
|
|
|
OPEN PATH DETECTORS
- Open-path line of sight gas IR detectors
- Crowcon offers open-path infra-red (IR) gas detection systems based
on well-proven technology for fast detection of combustible gases and
vapours over a line-of-sight up to 200m long.
|
|
- Rapidly deployable wireless Carbon Monoxide detector for use in hazardous environments
- Fast and simple to operate with a self-forming wireless network and units come online automatically
- Local display of gas concentrations
- Rugged weather resistant housing
- Multiple controller options for real-time wireless data collection and viewing from over 500 detectors
- Self-healing network automatically routes data back to controller through best wireless path available
|
MeshGuard EC
- Wireless gas detector with six-month continuous runtime for hazardous environments
- Rugged, reliable, and designed for rapid deployment.
- It runs for up to
six months on a single battery and provides continuous detection and
measurement of potential threats even in hazardous work environments
such as oil and gas rigs, industrial sites, and refineries.
|
MeshGuard LEL & MeshGuard LEL IR
- Rapidly deployable wireless flammable gas detector for use in hazardous environments
- precisely monitor the lower explosive limit (%LEL) of flammable gasses
in your facilities.
- This rapidly deployable solution intelligently forms
a self-healing network with other monitors and a RAE Systems controller
to wirelessly transmit data and alarm status.
- That same information
also displays on the device's LCD screen and is communicated via
integrated audio and visual alarms.
|
RAEGuard 2 PID
- Easily calibrated, fixed VOC monitor
- Fixed, field-configurable detector for VOCs
- Continuous measurement
- Pre-programmed correction factors for more than 200 compounds
- Digital and analog outputs
- Simplified calibration and maintenance with removable PID sensor
- Graphic display and LED status indicator for fault and alarm conditions
|
MeshGuard RDK
- Rapidly deployable fixed gas detection system
- Portable, turnkey solution for fast set-up
- Includes controller and monitors of your choosing
- Class I, Division 1 certified detectors for hazardous environments
- Ruggedized, water-tight case on wheels
|
|
|
ULTIMA® X5000
- New design featuring an Organic LED (OLED) display and bright status LED's for extreme visibility
- An industry first, a touch-button interface for an intuitive user experience and tool-free operation.
- TruCal
technology actively monitors the sensor integrity and compensates for
environmental factors that cause regular electrochemical sensors to
drift.
- Automatically self-checks 4x/day
- Reduces downtime
- Three year warranty on XCell sensors
|
PrimaX I Gas Transmitter
- The indoor/outdoor PrimaX I Gas Transmitter detects toxic gases and oxygen
- Worry-free transmission with a 4-20 mA output signal and optional HART digital communication
- Plug-in sensors and easy installation and calibration make this transmitter virtually trouble-free
- Large LCD screen provides information at a glance
|
PrimaX P Gas Transmitter
- The indoor/outdoor PrimaX P Gas Transmitter detects toxic gases, oxygen and combustible gases
- Worry-free transmission with a 4-20 mA output signal and optional HART digital communication
- Optional configurable Alarm and Fult relays
- Plug-in sensors and easy installation and calibration make this transmitter virtually trouble-free
- Large LCD screen provides information at a glance, while three LEDs give clear status indication
- Isolated outputs version available allowing for a separate power supply and output signal to a PL
|
|
Ultima X Series
- Indoor/outdoor monitors feature HART, which provides more
information and features convenient set-up, calibration and diagnostics
- Interchangeable smart sensors eliminate need for reconfiguration
- MSA's patented sensor design allows sensor replacement without declassifying the hazardous area
- DuraSource Technology extends sensor life
- Automatic calibration adjustments and date stamping
- Stainless steel and polycarbonate models available
|
Ultima XL/XT Series
- Indoor/outdoor monitors feature HART, which improves information and provides convenient set-up, calibration and diagnostics
- Interchangeable smart sensors eliminate need for reconfiguration
- MSA's patented sensor design allows sensor replacement without declassifying the hazardous area
- Automatic calibration adjustments and date stamping
- Stainless steel and polycarbonate models available
|
Ultima X Series Gas Monitors with X3 Technology
- Interchangeable smart sensors eliminate need for reconfiguration
- MSA's patented sensor design allows sensor replacement without declassifying the hazardous area
- Automatic calibration adjustments and date stamping
- Stainless steel and polycarbonate models available
|
FGD 14 SERIES
SAFE AREAS-MAINS/DC POWERED
CO2, O2, H2S,
CO, CL, NO2,NH3,
SO2, NO,HCL, C2H4O
- The FGD14 series are stand-alone gas detectors with a front panel
display of the gas level. The detectors contain 2 control relays that
can be activated via user definable alarm set points; the relay contacts
can then be used to control external equipment.
|
FGD 10 SERIES
INFRARED & NON INFRARED SERIES
CH4, C2H6, C3H8,
C4H10, C5H12, CO2,
H2, CO, NH3, O2
- Flameproof Fixed Gas Detectors are used in Potentially Explosive Atmospheres where,
due to the nature of the environment or the industrial process taking place,
there is the risk of an incendive spark from electrical apparatus causing an
explosion to occur.
|
FGD 4 SERIES
SAFE AREA-LOOP POWERED
CO2, O2, H2S,
CO, CL, NO2, NH3,
C2H4O, NO, HCL
- Warning - These gas detectors must only be used in
applications where there is no risk of potentially explosive gases being
present or of them being created through industrial processes or other
activities within the area concerned.
|
|
|
FGD 3 SERIES
INSTRICALLY SAFE GAS DETECTORS
CO2, H2, O2, H2S,
CO, CL, NO2, NH3,
SO2, NO, HCL, HCN
- These gas detectors are designed so that the energy produced in the event
of an electrical fault is insufficient to cause an incendive spark.
- The FGD3 series gas detectors are powered from an intrinsically safe dc power
supply and provide an industry standard 4 to 20mA output signal.
|
|
- Carbon dioxide (CO2) or a carbon dioxide and oxygen (O2)
fixed monitoring system, designed to monitor gas levels in a confined
space such as a beer cellar.
- The Cellaguard system consists of a wall
mounted base station, housing the gas monitoring system, and is normally
supplied with one repeater unit to be located in a safe position
outside the confined space area
|
XNX™ Universal Transmitter
- Flammable gas detection 0 to 100% LFL/LEL
- Flexible operation options
- Minimal training required
|
Sensepoint XCD
- All-in-one gas monitoring solution
- Proven SurecellTM electrochemical sensors
- Global approvals
|
Sensepoint XCD RFD
- Accurate detection with fast response
- Mount sensor up to 100 ft. from transmitter
- Easy to read tri-color backlit display
|
|
|
Sensepoint XCD RTD
- Common transmitter platform cuts stocking and procurement costs
- Obtain maximum coverage in areas not easily accessible
- Prevent false alarms with auto-inhibit during maintenance
|
|
CC28
Transmitter
- Combustible Gas Detector
- Full-featured
smart transmitter for combustible gas measurement
- Non-intrusive
calibration adjustment
- Sensor lasts
5 years or longer
- Also available
for wide range of toxic gas measurement
- Display of gas
concentration at transmitter
- Ex-proof visual
and audible alarm
- One-person calibration
at transmitter by means of touch keys or remote control
- Plug-in smart
sensor – sensor replacement without opening casings
|
EC
28 – The Smart Transmitter
- For
Toxic Gases, Oxygen, and Hydrogen
- Reading of gas
concentration at transmitter display
- Ex-proof visual
and audible alarms
- ATEX certificate
II 1 G EEx ia IIC T4 / II 2 G EEx em [ib] IIC T4
- One-person calibration
at transmitter using touch keys or remote control
- Plug-in smart
sensor – sensor replacement without opening the casing
|
|
|
|
|
D-2-4, Setia Walk, Pusat Bandar Puchong,
47160 Puchong, Selangor,
Malaysia
Tel: + 6012-921 3877; 603-5879 7121
Fax: +018 635 1593
Email: ancor.my@gmail.com
sales@gasmonitors.com.my |
|
|
|
|
|
