Data Output Module for Ax60+
Analox’s newest addition to the flexible muliti gas system, the Ax60+ is the Data Output Module. This accessory provides signals to output real-time activity of sensors via a 4-20mA
and MODBUS RTU communication to a remote system such as a central
control panel, a Building Management System (BMS), or any appropriate
device.
The module has has 2 types of communication output, four individual 4-20mA
outputs and MODBUS RTU by RS 485 serial link. Both types are able to
communicate a sensor measured value and status to a master control
panel or screen in a different location making it easier for the user to
monitor all readings from devices in their facility in one location.
Compatible with any Analox Ax60+
* including previously installed Ax60+ systems, the Data Output Module
is simple to mount and commision. To make it even easier to connect to
the Ax60+* the The Data Output Module is available as quick connect or hard wired.
Key features and benefits of the Data Output Module:
4-20mA
Simple to install, industry standard communication method for communicating sensor status to remote locations.
• 4 channels (1 per sensor)
• Transmits gas levels (e.g. 20.9% O2)
• Fault diagnostics (e.g. Sensor is in fault, analogue output drives down to 3mA)
MODBUS
MODBUS
enables more detailed communications regarding sensor status and allows
monitoring of the Ax60+ system for more in depth analysis.
• Enables the transmission of multiple data messages from each sensor
• Transmits gas levels (e.g. 5000 ppm CO2)
• Transmits alarm status (e.g. AL2 Triggered)
• Ability to transmit fault status (e.g Sensor 2 is in fault)
To register your interest in this product or to inquire about purchasing one please fill in the form below.
For more information on multi- gas monitoring for CO2 and O2 detection please view our Ax60+ Because plus is more.
