Oxygen is one of the most critical parameters to monitor on
any dive system as not only are low levels of oxygen dangerous, but high
levels can pose a fire risk or cause toxicity in the body. It is vital
the divers receive the correct partial pressure (pp) of O2 in order to live and work comfortably.
The SDA O2 can be used in a wide range of areas in order to
assist divers including decompression chambers, saturation diving and
gas cylinder monitoring.
Key features
- Intelligent sensors flag when calibration and sensor changes are due
- Large full colour display - for easy viewing of measurements
- Ambient O2 pressure correction
- Datalogging available
Gases monitored
Where can it be used?
The SDA O2 monitor can be used to monitor the air which is
supplied to divers to make sure that the level of oxygen supplied to
divers is correct, which is important if divers are using a blended gas
like nitrox or heliox. It can also be used to measure oxygen levels in
gas cylinders with the use of a flow adaptor.
The SDA O2 can also be used in decompression chambers which
need to be used if a diver surfaces too quickly and is at risk of
decompression sickness. The unit can be mounted inside or outside the
chamber.
It can also be used in saturation diving systems, surface supplied surface diving as well as hyperbaric oxygen therapy.
SDA O2 downloads
