The pump accessories (3 rubber inlets and lubricant) as well as the instruction sheet are provided in a convenient shoulder bag.
Gas Sampling Pump Features
The built-in tip breaker
incorporates a diamond edge for maximum durability that cuts the surface
of the detector tube. This makes the tip breaking much easier, safer
and convenient. Discarded tips are deposited in a storage bin for safe
and easy disposal.
The pump piston has been designed
with a smaller diametre so that the handle can be pulled out with even
less effort. This permits anyone to operate the pump easily. Also,
GASTEC Pump Model GV-110 and GV-100 meet the leakage test of EN1231,
Workplace atmospheres-Short term detector tube measurement
systems-Requirements and test methods, 4.2 Detector tube pump, 4.2.2
Leakage "The detector tube pump with the closed detector tube connection
shall be tight, so that during the first minute of a pump stroke the
leakage rate does not exceed 3mL/min." The GASTEC pump shaft shows you
the leakage rates with a red line.
The pump body is covered with a soft
elastomer, with the middle portion narrower than the ends to ensure a
firm grip on the pump cylinder. The other outer surfaces of the pump are
made of non sparking materials of ABS resin except for the opening of
the tube tip cutter, which is made of chromed stainless steel.
The full-stroke (100mL) and the
half-stroke (50mL) positions are marked exactly by the red line on the
pump shaft, and the handle is precisely locked at those positions. The
attached flow finish indicator tells you automatically when the stroke
is complete. When the white disk pops out,the sample is complete.
D-2-4, Setia Walk, Pusat Bandar Puchong,
47160 Puchong, Selangor,
Malaysia
