Gas Monitor
Total Analytical Solution 
D-2-4, Setia Walk, Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia
 
Tel: + 6012-921 3877; 603-5879 7121
Fax: +018 635 1593
Email: ancor.my@gmail.com
            sales@gasmonitors.com.my
   Home      Honeywell- Colorimetric Gas Detection Tubes
     
 
 
 
 
 

Colorimetric Gas Detection Tubes

For quick, on-the-spot, compound-specific measurement of a wide range of toxic and combustible gases and vapors.
Gas detection tubes operate in the following manner: An air sample is drawn through a tube containing a reagent, causing a color change. The concentration is then read from the length of the color stain in the reagent. The advantages of detection tubes over other analytical methods are simplicity of use, rapid response, low cost, and very low maintenance. Because each batch of Honeywell tubes is pre-calibrated, no calibration equipment is necessary. Errors are prevented by directly marking the calibration information on each tube, and accuracy is further ensured by controlling the volume of air sampled. Honeywell tubes are primarily of the narrow bore type and are designed for use with a Honeywell handoperated piston pump.
 
 

Features & Benefits

  • Quick, accurate, low-cost measurements
  • Solid metal construction with lifetime warranty
  • No calibration or other maintenance required
 

Quick Specs

  • Wide assortment of tubes available to detect over 300 gases and vapors
  • Easy-to-read with sharp, clear color change
  • Springless piston design accurately draws
 
 
 
 
 
 
Colorimetric Gas Detection Tubes
 
 
 Type
Part No.
Standard Range
Extended range
Acetone
H-10-111-40
0.1 to 2%
0.05 to 4%
Amines
H-10-132-10
0.5 to 10 ppmv
0.25 to 20 ppmv
Ammonia
H-10-100-05
1 to 30 ppmv
0.5 to 60 ppmv
 
H-10-100-10
5 to 100 ppmv
2.5 to 200 ppmv
 
H-10-100-12
10 to 260 ppmv
5 to 520 ppmv
 
H-10-100-15
25 to 500 ppmv
12 to 1000 ppmv
 
H-10-100-40
1 to 15%
0.5 to 30%
Benzene
 H-10-101-01*
0.5 to 10 ppmv selective
0.25 to 30 ppmv
 
H-10-101-10*
5 to 40 ppmv selective
2.5 to 200 ppmv
 
H-10-101-20
5 to 100 ppmv
2.5 to 200 ppmv
1,3-Butadiene
H-10-135-04
0.5 to 5 ppmv
0.25 to 10 ppmv
n-Butane
H-10-137-30
25 to 1400 ppmv
12.5 to 2800 ppmv
Carbon Dioxide
H-10-104-30
300 to 5000 ppmv
150 to 10,000 ppmv
 
H-10-104-40
0.05 to 1%
0.025 to 2%
 
H-10-104-45
0.25 to 3%
0.125 to 6%
 
H-10-104-50
1 to 20%
0.5 to 10%
 
H-10-104-60
5 to 40%
1.25 to 20%
Carbon Monoxide
H-10-102-18
5 to 100 ppmv selective
2.5 to 300 ppmv
 
H-10-102-20
5 to 100 ppmv
2.5 to 200 ppmv
 
H-10-102-30
20 to 500 ppmv
10 to 1000 ppmv
 
H-10-102-45
0.2 to 4%
0.1 to 8%
Chlorine
H-10-106-10
0.5 to 8 ppmv
0.25 to 16 ppmv
H-10-106-20
5 to 100 ppmv
2.5 to 200 ppmv
Chlorine Dioxide
H-10-130-10
0.25 to 15 ppmv
0.05 to 30 ppmv
Ethanol
H-10-141-30
100 to 2000 ppmv
50 to 200 ppmv
Formaldehyde
H-10-121-05
0.1 to 5 ppmv
0.8 to 40 ppmv
Petrol
H-10-138-30
30 to 1000 ppmv
15 to 2000 ppmv
Hydrocarbons
H-10-110-30
50 to 1000 ppmv
25 to 2000 ppmv
Hydrogen Chloride
H-10-108-09
1 to 20 ppmv
0.5 to 40 ppmv
 
H-10-108-10*
1 to 20 ppmv w/ desiccant
0.5 to 40 ppmv
 
H-10-108-22
20 to 500 ppmv
10 to 1000 ppmv
Hydrogen Cyanide
H-10-126-10
2.5 to 60 ppmv
1.25 to 120 ppmv
Hydrogen Fluoride
H-10-105-10
0.5 to 20 ppmv
0.25 to 40 ppmv
Hydrogen Sulphide
H-10-103-04
0.2 to 3 ppmv
0.1 to 6 ppmv
 
H-10-103-05*
0.2 to 3 ppmv w/ desiccant
0.1 to 6 ppmv
 
H-10-103-06
1 to 7 ppmv
0.25 to 3.5 ppmv
 
H-10-103-10
2.5 to 60 ppmv
1.25 to 120 ppmv
 
H-10-103-12
0 to 150 ppmv
0 to 300 ppmv
 
H-10-103-15
10 to 120 ppmv
5 to 240 ppmv
 
H-10-103-18
25 to 250 ppmv
12.5 to 500 ppmv
 
H-10-103-20
50 to 800 ppmv
25 to 1600 ppmv
 
H-10-103-30
100 to 2000 ppmv
50 to 4000 ppmv
 
H-10-103-40
0.1 to 2%
0.05 to 4%
 
H-10-103-50
2 to 40%
0.5 to 20%
MEK
H-10-113-20
0.02 to 0.6 %
0.01 to 1.8 %
Mercaptans
H-10-129-20
5 to 120 ppmv
2.5 to 240 ppmv
Methyl Bromide
H-10-131-10*
1 to 18 ppmv
0.5 to 36 ppmv
 
H-10-131-30*
20 to 300 ppmv
10 to 600 ppmv
Nitric Acid
H-10-146-20
1 to 20 ppm
0.5 to 40 ppm
Nitrogen Dioxide
H-10-117-10
0.5 to 30 ppmv
N/A
Nitrogen Oxides
H-10-109-20*
1 to 50 ppmv
0.5 to 100 ppmv
Ozone
H-10-133-03
0.05 to 0.6 ppmv
0.15 to 1.8 ppmv
Phenol
H-10-139-05
1 to 25 ppmv
0.5 to 180 ppmv
Phosphine
H-10-116-10
5 to 50 ppmv
2.5 to 100 ppmv
 
H-10-116-20
25 to 500 ppmv
12.5 to 1000 ppmv
 
H-10-116-25
50 to 1000 ppmv
25 to 2000 ppmv
Sulphur Dioxide
H-10-107-15
2 to 30 ppmv
1 to 60 ppmv
 
H-10-107-20
5 to 100 ppmv
2.5 to 200 ppmv
 
H-10-107-25
100 to 1800 ppmv
50 to 3600 ppmv
 
H-10-107-30
200 to 4000 ppmv
50 to 2000 ppmv
 
H-10-107-40
0.2 to 5 %
0.1 to 10 %
Toluene
H-10-114-20
10 to 300 ppmv
5 to 600 ppmv
Trichloroethylene
H-10-119-20*
5 to 100 ppmv
2.5 to 230 ppmv
Vinyl Chloride
H-10-128-10*
1 to 20 ppmv
0.5 to 40 ppmv
Water Vapour
H-10-120-10
2 to 10 lbs/MMCF  (0.03 to 0.16 mg/L)
1 to 20 lbs/MMCF
 
H-10-120-20
6 to 40 lbs/MMCF  (0.1 to 0.64 mg/L)
3 to 80 lbs/MMCF
 
H-10-120-30
0.05 to 1 mg/L
0.025 to 2 mg/L
 
H-10-120-40
1 to 18 mg/L
0.5 to 32 mg/L
Xylenes
H-10-112-20
10 to 200 ppmv
5 to 400 ppmv

* Box contains 5 colorimetric tubes and 5 pre-tubes, for a total of 5 measurements.
Other boxes contain 10 colorimetric tubes.
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
D-2-4, Setia Walk, Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia

Tel: + 6012-921 3877; 603-5879 7121
Fax: +018 635 1593
Email: ancor.my@gmail.com 
           sales@gasmonitors.com.my