Gas Monitor
Total Analytical Solution 
D-2-4, Setia Walk, Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia
 
Tel: + 6012-921 3877; 603-5879 7121
Fax: +018 635 1593
Email: ancor.my@gmail.com
            sales@gasmonitors.com.my
   Home      Wagner- Orion® 930
        
 
 
 
 
 
 

Orion® 930 Dual Depth Pinless Wood Moisture Meter

The Orion 930 Dual Depth Pinless Wood Moisture Meter was designed for professional wood flooring installers/inspectors, quality control managers as well as serious woodworkers, artisans, and fabricators. 
 
  • Dual Depth Measurements
  • IntelliSense™ Technology
  • Fast Selection Species Settings
  • Non-Damaging Pinless Sensor
  • Virtually Unaffected by Temperature
  • On-Site Calibration
  • Relative Moisture Measurement Mode
  • Press to Hold Readings
  • Programmable Alarm
  • 7-Year Warranty
  • Ruggedized Protective Rubber Boot and Hard Case
 
 
 
 
 
 
 
 
 
 
 
https://www.wagnermeters.com/wp-content/uploads/2018/10/Orion-930-Packaging-600x400.png
 

The Orion 930 has all the common features of the 910 and 920 plus it adds:

Dual Depth Measurements

The Orion 930 Dual Depth Pinless Moisture Meter combines the Deep and Shallow readings of the 910 and 920 into one Dual Depth mode. This mode provides readings at ¼” and ¾” depth modes to measure the moisture content of thin samples such as wood floors or deeper into thick wood samples to find moisture further into the wood. In ¼” mode the meter will read the moisture content from the surface level down to .25” (6mm). In ¾” mode the meter’s IntelliSense™ technology will be activated and the meter will begin to disregard surface moisture.

 
 

IntelliSense™ Technology

The Orion 930 pinless wood moisture meter incorporates IntelliSense™ technology into its ¾” deep reading mode. This enables accurate determination of the moisture content deeper in the wood while minimizing the effect that surface moisture will have on the meter readings. Pin-type meters may be able to bypass the surface conditions, but they also damage the surface of the wood every time you take a reading. Air humidity, condensation, or other ambient conditions can impact many moisture meters and give inaccurate readings that cost you money.

 
 
 

Orion 930 Rubber BootEach Orion 930 Dual Depth Pinless Wood Moisture Meter comes with the following:

  • 1  Orion 930 Dual Depth Pinless Wood Moisture Meter
  • 1  Paired On-Demand Calibrator
  • 1  Rubber Protective Boot
  • 1  Foam-lined ABS Plastic Carrying Case
  • 1  9V Battery

Orion 930 Calibration With ArmFast Selection Species Settings

With simple up/down arrow buttons, your Orion 930 meter can be easily and quickly set for the wood species you need to measure. Plus, the range of settings accommodates practically any softwood or hardwood species in the world. The Orion 930 can also be configured to measure some non-solid wood products such as plywood, OSB, or MDF. Orion meters also have species settings for many bamboo flooring products.

Non-Damaging Pinless Sensor

Every Orion meter features electromagnetic wave technology…a non-damaging way to quickly and accurately measure the moisture content of wood or other materials. Compared against pin meters, the pinless sensor technology of the Orion line of meters does not damage the wood and also eliminates the frustrations and costs of broken pins, common with pin-type meters.

Virtually Unaffected by Temperature

Every Orion pinless meter is virtually unaffected by the temperature of the wood or the environment. Unlike pin meters, Orion’s sensing technology does not need correction or adjustment to account for the temperature of the wood.

True In-The-Field Calibration

No need to return your Orion to the factory for calibration. Every Orion meter comes with an individually paired On-Demand Calibrator allowing you to easily calibrate your meter anytime*, ensuring that you will always be able to obtain accurate moisture measurements. A NIST-traceable version, with a certificate of calibration, can also be purchased.

 
 
 

Relative Moisture Measurement Mode

A relative moisture measurement mode allows for taking relative moisture measurements in non-wood based materials and engineered wood flooring. This means you can use an Orion moisture meter to obtain relative moisture conditions on a number of non-wood building materials and flooring products.

Press to Hold Readings

On every Orion moisture meter, if you press down once on the ON/HOLD button it will hold the moisture reading you took. This is quite useful if you’re measuring in a hard to reach area.

Programmable Alarm

The Orion 930 includes a user-programmable, audible alarm for high moisture content levels.

 
 
 

 

 
 
 

 
D-2-4, Setia Walk, Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia

Tel: + 6012-921 3877; 603-5879 7121
Fax: +018 635 1593
Email: ancor.my@gmail.com 
           sales@gasmonitors.com.my